The steps to Bathtub Replacement include removing the spout, waste, and overflow with a screwdriver. Next, cut away the wall where the tub spout is located. In some cases, there are set screws holding the spout in place. If this is not the case, you may want to replace the spout yourself.
Replacing a bathtub can be expensive. Depending on the state of your plumbing, you may have to redo the floor tile around it, reinforce the subfloor, and more. Depending on the materials you choose, the cost of installing a new tub may range from $300 to $1,900. The cost of replacing a bathtub can also include installing new fixtures and fittings. You can also hire Bathtub Replacement to handle the simple plumbing, floor, and wall repairs.
You should get at least two estimates before settling on a final price. Then, make sure that the quotes include all the services that you need. Also, check references to ensure that the company is licensed and reputable. The cost of a new bathtub varies considerably depending on the materials used and the type of bathtub. Generally, a standard bathtub will cost between $200 and $500, but the price can be higher for a cultured marble tub. Also, remember that you may need to get a building permit to make any changes to the plumbing or wiring. You should also consider the additional cabinetry or fixtures, as well as specialty services, which can increase the cost.
If the bathtub is damaged by cracks, chipping, or leaking, it might be worth repairing it with a repair kit. However, if the cracks are too large to patch up, you might need to replace the bathtub entirely. A loose caulk can also lead to moisture in the bathtub. This is not a huge problem, but it indicates a leak somewhere. If this leak is serious, it may require a complete overhaul of the bathtub and the pipes.
Removing a bathtub is usually fairly simple. The cost of hiring a plumber and hauling away the old bathtub will be around $100. You may need to remove a wall to make more space for the new tub.
There are a few steps that you must follow before installing a new bathtub. First, you need to remove the old bathtub. This will require you to disconnect the flange from the wall studs. Once you have done that, the new tub will be set into place. Make sure that the new bathtub is level and that there are no gaps in the wall or floor. If it’s not, you may need to add a spacer. Next, you’ll have to access the drain pipes, which might require cutting a hole in the adjacent wall or floor.
If you have a family member who can help you, it’s a good idea to get them to help you with the process. You can also use twox4s to lift the old bathtub off the floor. You’ll also need a cross piece of wood to support the edge of the new tub and to reinforce it during the installation. You’ll also need to remove the stringer supports from the wall.
Before installing the new tub, you need to check the drain pipes of the old bathtub. It’s important to align the drain outlet of the new bathtub with the drain outlet of the old bathtub. If there’s a foot valve on the drain, close it so that water will not leak. Next, you need to connect the drain pipe to the overflow flange.
If you’re replacing the entire bathtub surround, you’ll need to remove the drywall around it. This step should be easy enough and shouldn’t take more than a couple of hours. It’s a good idea to wear safety glasses when you do this part, as the old drywall may be moldy.