How Much Does Concrete Leveling Cost?


Uneven concrete surfaces can be unsightly and even dangerous. Fortunately, concrete leveling can lift uneven sections of sidewalks, driveways, and patios without replacing them.

The concrete leveling process fills voids under sinking slabs, stabilizes loose soil, and lifts them back to their original position. It’s also less expensive than slab replacement. Click to learn more.

There are many variables that impact the cost of concrete leveling, and it’s impossible to pinpoint a specific price for the repair until an expert has seen the site in person. That said, it’s possible to get a general sense of the costs involved by looking at pricing ranges for specific locations and service types.

Concrete leveling, also called mudjacking or slab jacking, is the process of returning sunken concrete to its original position without the expense of pouring new concrete. It uses a mixture of limestone grout and slurry to fill the void under the concrete and lift it back up. It can be used to repair a variety of problems, including sinking patios and garage floors. It’s often less expensive than replacing a slab, and it can usually be completed in half the time.

The slurry mix used in concrete leveling is injected through small holes drilled into the concrete. The material expands when it hits water, causing it to lift the slab. The holes are then filled with non-shrinking grout to leave the concrete looking nearly new. While the slurry is being applied, the technician must take care to ensure the soil underneath the slab does not wash away.

If the soil under a concrete slab is washed away, it can cause the concrete to shift and crack. This creates a hole that the concrete sinks into, and it can cause other issues with the structure of the house or garage. Concrete leveling can address this problem and prevent the concrete from becoming unusable.

The cost of concrete leveling depends on the size of the slab and the type of slurry used. A larger slab is more difficult to repair than a smaller one, and it will probably require more slurry. Some products come as a dry mix that you can add water to, while others are pre-mixed in a tub.

You may need a permit to perform concrete leveling, but this varies by location. It’s best to contact a local concrete leveling company to learn more about the requirements in your area. Generally, you will not need a permit for non-load-bearing concrete slabs such as driveways or patios. However, you will likely need a permit for load-bearing concrete slabs such as foundations or basement floors.


Concrete leveling is a cost-effective and time-efficient repair solution for sunken concrete surfaces, including driveways, patios, porches, pool decks, and sidewalks. It uses hydraulic pressure to fill the voids under the slab and lift it back to its original position. It can also be used to repair existing cracks and reduce the risk of future damage due to water erosion or freeze-thaw cycles.

Using concrete leveling is also an eco-friendly alternative to traditional repair methods, such as breaking up and replacing the damaged concrete slab. The process does not require any new cement production, which helps minimize the impact on the environment. It is also quicker and more cost-effective than replacing the concrete slab, as it requires less labor and equipment.

In addition to reducing the environmental impact, concrete leveling can help you save money by preventing tripping hazards and improving the overall safety of your property. Uneven surfaces are a common cause of trips and falls, especially among elderly people and individuals with disabilities. Leveling the concrete can prevent these hazards, making your property safer for everyone who uses it.

Another benefit of concrete leveling is that it can improve the aesthetics of your home or business. Uneven concrete can make your property look dilapidated and unattended, but leveling the surface can raise its curb appeal and make it more attractive to potential buyers or tenants.

If you are considering DIY concrete leveling, it is important to consult a professional before beginning the process. Not only will they have the right tools and equipment, but they will also be familiar with the local soil conditions and know how to adjust the process accordingly. In addition, a professional concrete leveling service will be able to identify any structural problems that may need attention.

One of the most common ways to determine if you need concrete leveling is by observing whether there are hairline cracks from the walls to the floors or if the sidewalk is tilting. Uneven concrete can also lead to water pooling, which can damage the foundation and create a tripping hazard for pedestrians. Concrete leveling can correct these problems and redirect water flow away from the foundation, helping to protect the structure and keep it safe for pedestrians.


If your concrete has become uneven over time, it may be a safety hazard and require leveling. Uneven surfaces are dangerous for tripping and can cause injuries to your family or guests. You can avoid these problems by having your concrete leveled by a professional. The process involves drilling strategic holes in the settled concrete slabs and pumping a lifting compound through them. This compound lifts the slabs back into a level position and also prevents further damage. You can hire a contractor to do this for your home or commercial property. A good contractor will explain all the risks and benefits of this method.

Before you start the process, make sure your work area is clean. Sweep any debris from the surface and look for any glue or other adhesives that need to be removed. You should also wear rubber gloves and dust masks to protect your face from dirt and concrete particles.

You will also need a wheelbarrow to help you move the concrete leveling compound. You should also have a bucket of hot water to pour on the surface. This helps open the pores of the concrete and soften any residue from carpet glue or other adhesives that are stuck to the surface. It is important to do this before you begin the process, as it will make it much easier for the concrete leveling material to adhere to the concrete surface.

After you have prepared the surface, apply a layer of concrete leveling primer to the concrete. This product is formulated to work in tandem with the concrete leveling compound and help it adhere to the existing concrete. It also protects the concrete surface, preventing it from losing water and allowing the concrete leveling compound to last longer.

One of the most common reasons that concrete becomes uneven is due to soil settling. This can occur because of a number of factors, including improper drainage or compaction. It is possible to level a concrete surface without tearing it out, but the problem will most likely return in the future.


Concrete leveling repairs eliminate tripping hazards, stabilize sunken concrete, and prevent the need for expensive replacement. While it can be costly to tear up and replace uneven concrete, a standard concrete leveling job will only take a few hours. This can save you money and time, as well as give you peace of mind that your uneven concrete will last for years to come.

The time required to complete a concrete leveling repair depends on the method used. One popular method is mudjacking, also known as slab jacking. This process involves injecting a mud-like mixture of cement, water, and soil to raise the sunken concrete. Small holes are drilled into the sunken concrete, and the mixture is then pumped into those holes. This process is much more invasive than polyleveling, which uses a similar method but with a different material.

Mudjacking is particularly problematic in the winter, when freezing temperatures can cause the mud-like mixture to solidify or freeze inside the pump. This can prevent the contractor from using the material to lift the concrete. Additionally, cold temperatures can cause a mud-like substance to lose its consistency, leaving behind voids that may not be fixed once the weather warms up.

Another problem with mudjacking is that it can take days for the mud-like mixture to cure and set. This can be a major issue for homeowners who want to use the area as soon as possible. While this problem is not common, it is important to know that it is a possibility before hiring a concrete leveling company.

A final problem with mudjacking is that it can take a long time for the concrete to settle back to its original position after the procedure. This is because the concrete needs to bind to the surrounding soil as it expands and contracts. This is less of a concern with polyleveling since the expanding foam will quickly fill in any voids underneath the concrete.

The time it takes to complete a concrete leveling job will vary depending on the size and complexity of the project. However, a good concrete leveling company will provide a clear and straightforward estimate that will cover all of the costs associated with the service. This will ensure that the client is not surprised by any unexpected expenses or delays in completion.